Hacker Newsnew | past | comments | ask | show | jobs | submit | folmar's commentslogin

Auto mode will upload artifacts to Anthropic without asking at least sometimes, for example it did upload my slide decks.


Not auto mode itself (that's just Sonnet running a purely security prompt), but if you're working on a slide deck I can see an upload needed so the working model can "look" at the decks to fulfill your request. If that deck wasn't referenced at all in your prompting requirements... well at least we still have sandboxes.


I don't know what current Windows 11 does, but my typical Linux Mint is single-digit seconds, and my t490 is 7 years old already. Windows 10 is a bit slower but still single second territory. With more current hardware we are talking about 2 seconds plus whatever BIOS needs, see sibling comments. Maybe you have corporate AV on the Windows PC, or funny drivers?


It does indeed boot to desktop in ~30 seconds (including BIOS time), however it then sits there loading services and tray apps for another 30 seconds before it becomes responsive. TBF, I could probably eliminate a lot of that if I were motivated to strip it down


I used to have a Thinkpad with Arch+Xfce. It was ready to go from restart to desktop in 3-4 seconds. The "catch" was that I was booting from a NVMe.


My Thinkpad T490 will happily take any power provided voltage is high enough (15V+).


If you don't use a lot of quota the cheapest monthly Claude Code is $20, Kimi Code is $19, i.e. the cost difference is minuscule.

Kimi wants my phone number on signup so a no-go for me.


Heavy duty trucks run well on electric in the EU at least, as the work time regulation make for regular charging and lower speed limits for trucks makes the consumption manageable.


Electric excavators are there, as they are low duty cycle, see sibling comments for details, but high load percent for long time is a killer for battery tech.

I could imagine tethered tractors with power line tensioned in the air, but the grid building cost will be quite high for intermittent usage. Only some land usages and plot shapes would work economically.


In EU it would be some $3k for inverter, $5k for panels, another $5k for cables, connectors and mounting and that's it if you DIY everything. Prices with VAT included.


Same in the Philippines here, and we're all buying the same Chinese materials at the end of the day so somehow Americans are getting really fleeced hard on this equipment.

Payback time is 2-4 years.

It reminds of healthcare and infrastructure in the US. When you really dig into why both are so expensive, it's literally every step. Every link in the chain between supplier and consumer is some kind of inefficient market, or burdened by regulations, etc.

Americans are just so rich they don't care enough to see these huge margins and undercut the competition, which is what happens here and keeps markets much more efficient.


I only get the following message:

Access Denied Error 16 www.ercot.com 2026-04-22 19:52:02 UTC

If you believe you have a valid business reason for accessing ERCOT resources, please contact the ERCOT Service Desk


I can access it fine (I am in the US). At this moment, 37.2% of the generation is from solar.


At the moment being important. Previous day it was higher at 38.8% but only for that 15min. As a percent of the whole day it’s much much lower. (California goes to 110% in the middle of the by comparison). It’s a good upward trend, I’m confident Texas will get there eventually.


For physical machines of course yes.

The linked one is VPS, so all trouble fixing is easier.


_This item does not exist_

Please post the item title, aliexpress links tend to be short-lived


It was just a link to that same Watchy I have mentioned elsewhere. Check the link in my original reply for a list of multiple ones.


Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: